Plastic Blasting Media (PBCM) is designed specifically for deflashing, coating removal, paint stripping, mold cleaning and surface preparation. Engineered for high performance, PBCM is clearly the leader when it comes to productivity and value. This is sometimes called Plastic Media, PMB (Plastic Media Blassting) or Plastic Abrasives.

They are 6 kinds of Plastic Blasting Media available: MF, UF, NR, PCC, AC, PCG.

1. Melamine Formaldehyde  

Type    Sieve No  Dimension(inch)   Dimensionmm)

MF 12-16  12/16    0.066/0.047     1.70/1.18

MF 16-20  16/12    0.047/0.033     1.18/0.85

MF 20-30   20/30   0.033/0.023     0.85/0.60

MF 30-40   30/40   0.023/0.016     0.60/0.42

MF 40-60   40/60   0.016/0.010     0.42/0.25

MF 60-80   60/80   0.010/0.007      0.25/0.18

Application:
A). Used for deflashing discrete products and other components in
Electronics industries and die casting.
B). For cleaning mold when it has stain in rubber product molding.
C). For Paint Stripping.

2. Urea Formaldehyde  

Type    Sieve No  Dimension(inch)   Dimensionmm)

UF 12-16  12/16    0.066/0.047     1.70/1.18

UF 16-20  16/12    0.047/0.033     1.18/0.85

UF 20-30   20/30   0.033/0.023     0.85/0.60

UF 30-40   30/40   0.023/0.016     0.60/0.42

UF 40-60   40/60   0.016/0.010     0.42/0.25

UF 60-80   60/80   0.010/0.007      0.25/0.18

Application:
A). Used for deflashing discrete products and other components in
Electronics industries.
B). For cleaning mold when it has stain in rubber product molding.
C). For Paint Stripping.

3. Polycarbonate Cryogenic 

Type      L x D (INCH)      L x D(mm)

PCC-80  0.080 x 0.080   2.00 x 2.00

PCC-60  0.060 x 0.060   1.50 x 1.50

PCC-45  0.045 x 0.045   1.14 x 1.14

PCC-38  0.038 x 0.038   1.00 x 1.00

PCC-30  0.030 x 0.030    0.75 x 0.75

PCC-20  0.020 x 0.020    0.50 x 0.50

PCC-15  0.015 x 0.015    0.38 x 0.38

Application: Used for deflashing in rubber product molding, engineering plastic molding & die casting if they have cryogenic deflashing machine.

4. Nylon-Red (Polyamide)

Type      L x D (INCH)      L x D(mm)

NR-80  0.080 x 0.080   2.00 x 2.00

NR-60  0.060 x 0.060   1.50 x 1.50

NR-45  0.045 x 0.045   1.14 x 1.14

NR-38  0.038 x 0.038   1.00 x 1.00

NR-30  0.030 x 0.030    0.75 x 0.75

NR-20  0.020 x 0.020    0.50 x 0.50

Application: Used for ambient deflashing in engineering plastic molding.

5. Acrylic

Type    Sieve No  Dimension(inch)   Dimensionmm)

AC 12-16  12/16    0.066/0.047     1.70/1.18

AC 16-20  16/12    0.047/0.033     1.18/0.85

AC 20-30   20/30   0.033/0.023     0.85/0.60

AC 30-40   30/40   0.023/0.016     0.60/0.42

AC 40-60   40/60   0.016/0.010     0.42/0.25

AC 60-80   60/80   0.010/0.007      0.25/0.18

Application: Used for blast cleaning depending on product that requires blasting.

6. Poly Allyl Di-Glycol Carbonate

Type    Sieve No  Dimension(inch)   Dimensionmm)

PCG16  12/16    0.066/0.047     1.70/1.18

PCG20  16/12    0.047/0.033     1.18/0.85

PCG30   20/30   0.033/0.023     0.85/0.60

PCG30-40   30/40   0.023/0.016     0.60/0.42

PCG40-60   40/60   0.016/0.010     0.42/0.25

PCG60-80   60/80   0.010/0.007      0.25/0.18

Application: Used for blast cleaning depending on product that requires blasting.